In SOFC, accurately measuring the hot-gas temperature is challenging due to low gas velocity, high wall temperature, complex flow geometries and relatively small pipe diameter. Improper use of low cost thermometry system such as standard Type K thermocouples (TC) may introduce large measurement error. The error could have a negative effect on the thermal management of the SOFC systems and consequential reduction in efficiency. In order to study the factors affecting the accuracy of the temperature measurement system, a mathematical model of a TC inside a pipe was defined and numerically solved. The model calculated the difference between the actual and the measured gas temperature inside the pipe. A statistical Design of Experiment (DOE) approach was applied to the modelling data to compute the interaction effect between variables and investigate the significance of each variable on the measurement errors. In this study a full factorial DOE design with six variables (wall temperature, gas temperature, TC length, TC diameter and TC emissivity) at two levels was carried out. Four different scenarios, two sets of TC length (6-10.5 mm and 17-22 mm) and two different sets of temperature range (550-650 °C and 750-850 °C), were proposed. DOE analysis was done for each scenario and results were compared to identify key parameters affecting the accuracy of a particular temperature reading.
|Journal||Journal of Physics: Conference Series|
|Publication status||Published - 1 Jan 2014|
|Event||32nd Italian Union of Thermo-Fluid-Dynamics Heat Transfer Conference, UIT 2014 - Pisa, Italy|
Duration: 23 Jun 2014 → 25 Jun 2014
Bibliographical noteContent from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.
Published under licence by IOP Publishing Ltd
FingerprintDive into the research topics of 'A design of experiments (DOE) approach to optimise temperature measurement accuracy in Solid Oxide Fuel Cell (SOFC)'. Together they form a unique fingerprint.
- School of Arch, Tech and Eng - Professor of Thermal Propulsion Systems
- Advanced Engineering Centre